# source this file in csh or tcsh to set up Geant4.8.0
#
# NOTE: Do not just define G4SYSTEM to be any old thing you imagine;
#       it must be something known to config/architecture.gmk !!!
#
#
#setenv KL_USE_ROOT 1   # only if you have ROOT installed and want ROOT output

setenv CERNLIB /cern/pro/lib

setenv GCC g++
setenv gxx g++
setenv gcc g++
setenv cc g++
setenv cxx g++
# this one is set in ../config/binmake.gmk
setenv CXX g++

# for GEANT4 VGM - virtual geometry model 
#setenv ROOTSYS /common/lib/CERN/rootsys # old version 04
setenv ROOTSYS /usr/local/bin/root       # new version 05.08
setenv VGM_INSTALL $HOME/vgm.2.07
setenv VGM_SYSTEM Linux-g++
setenv USE_VGM 1

#setenv G4DEBUG 1        # needs a lot of disk space default is optimised-mode 
setenv CPPVERBOSE 1
setenv G4_NO_VERBOSE 1   # verbosity code can be left out default: verbosity on
setenv G4LIB_BUILD_SHARED 1    # only if you want to use shared libraries
setenv G4LIB_BUILD_STATIC 1    # both shared and static libraries can be built
setenv G4LIB_USE_G3TOG4 1      #  Build Geant4 with use G3toG4 tool added 01/06

setenv G4SYSTEM Linux-g++

setenv G4INSTALL        $HOME/geant4.8.0
setenv G4INCLUDE        $G4INSTALL/include

setenv G4WORKDIR        $HOME/g4work/neutron
#setenv G4WORKDIR        $HOME/g4work/spin
#setenv G4WORKDIR        $HOME/g4work/TestEm5
#setenv G4WORKDIR        $HOME/g4work/parallel
#setenv G4WORKDIR        $HOME/g4work/guiding_center
#setenv G4WORKDIR        $HOME/g4work/IcaG4
#setenv G4WORKDIR        $HOME/g4work/pibeta_new
#setenv G4WORKDIR        $HOME/g4work/pen
#setenv G4WORKDIR         $HOME/g4work/N02

setenv G4DATA $G4INSTALL/data

setenv G4EXE $G4WORKDIR/bin/$G4SYSTEM

setenv LD_LIBRARY_PATH $HOME/CLHEP/lib:$G4INSTALL/lib/$G4SYSTEM
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${LD_LIBRARY_PATH}
setenv LD_LIBRARY_PATH ${VGM_INSTALL}/lib/${VGM_SYSTEM}:${LD_LIBRARY_PATH}

setenv CLHEP_BASE_DIR $HOME/CLHEP
setenv CLHEP_INCLUDE_DIR $HOME/CLHEP/include
setenv CLHEP_LIB_DIR $HOME/CLHEP/lib
#setenv CLHEP_LIB CLHEP-g++.1.9.2.2
setenv CLHEP_LIB CLHEP-1.9.2.2

# old redhat
#setenv GL /common/include/GL
# redhat 7.2
setenv GL /usr/include/GL

setenv G4USE_STL        1

setenv OGLHOME /usr/X11R6

#setenv G4VIS_BUILD_DAWN_DRIVER         1
#setenv G4VIS_BUILD_DAWNFILE_DRIVER     1
#setenv G4VIS_BUILD_RAYTRACER_DRIVER 1
setenv G4VIS_BUILD_OPENGLX_DRIVER       1
#setenv G4VIS_BUILD_VRML_DRIVER         1
#setenv G4VIS_BUILD_VRMLFILE_DRIVER     1

#setenv G4VIS_USE_DAWNFILE      1
#setenv G4VIS_USE_RAYTRACER 1
setenv G4VIS_USE_OPENGLX        1
#setenv G4VIS_USE_VRMLFILE      1

# define histos
#setenv G4ANALYSIS_USE 0
setenv G4NOHIST 1
setenv G4USE_G3TOG4 1

#setenv PATH ${PATH}:${G4INSTALL}/bin/${G4SYSTEM}

#echo "G4INSTALL=$G4INSTALL"
#echo "G4SYSTEM=$G4SYSTEM"
#echo "CLHEP_BASE_DIR=$CLHEP_BASE_DIR"

#setenv G4OPTIMISE 4

# use for gprofiling, or use: gmake G4DEBUG=1 G4PROFILE=1
#setenv G4PROFILE 1 
#setenv G4DEBUG 1

#setenv G4LEVELGAMMADATA $G4INSTALL/data/PhotonEvaporation
#setenv G4RADIOACTIVEDATA $G4INSTALL/data/RadiativeDecay
#setenv G4LEDATA  $G4INSTALL/data/G4EMLOW2.3
#setenv NeutronHPCrossSections  $G4INSTALL/data/G4NDL3.7
#setenv G4ELASTICDATA $G4INSTALL/data/Elastic

####################################################
# Your Geant4 installation seems to be successful!  
# To be sure please have a look into the log file:  
# $G4INSTALL/.config/bin/Linux-g++/g4make.log                              
####################################################